WE-2213B Large Capacity Wall Mounted Adjustable Automatic Soap Dispenser

Design Concept

The Soap Dispenser / WE-2213B 1000ml Automatic Soap Dispenser delivers an exceptionally reliable, high-capacity touchless hygiene solution engineered to solve maintenance inefficiencies in heavy-traffic environments. This commercial-grade dispenser utilizes an advanced anti-interference infrared sensor paired with a unique microprocessor program to ensure flawless triggering under variable vanity lighting conditions. Procurement managers can specify dual-fill internal systems to balance cost and hygiene, utilizing either a 1000ml open refillable tank for low-cost bulk liquid soap or a 1000ml sealed disposable HDPE cartridge to satisfy strict sanitary protocols. By integrating an orange internal three-level dosage adjustment button with a dual secure opening mechanism (key lock or manual push button), this system eliminates formula waste, protects internal batteries, and optimizes custodial workflows.

Materials & Craftsmanship

Built to withstand high-abuse public environments, the primary chassis is molded from high-impact ABS plastic, providing superior structural rigidity and resistance to harsh chemical cleaning agents. For premium commercial fit-outs, we offer upscale replaceable 304 stainless steel front panels that resist scratches and denting while elevating the washroom aesthetic. The internal fluid pathway features a premium medical-grade silicone liquid conduit and a robust gear mechanism engineered to exceed 300,000 continuous dispensing cycles. The optional disposable inner tank is constructed from high-density polyethylene (HDPE), creating a 100% leak-proof barrier compatible with standard alcohol-based hand sanitizers and foaming formulas. This exact design ensures the Soap Dispenser / WE-2213B 1000ml Automatic Soap Dispenser maintains peak mechanical performance and structural integrity over years of operational service.

Functionality & User Experience

This touchless system delivers a seamless and highly hygienic user experience, dispensing soap in under 0.2 seconds upon detecting hand placement. Custodial staff can instantly monitor remaining liquid levels via the broad, transparent front view window without unlocking the unit casing. Depending on the specified module, the dispenser provides two precision delivery modes: the high-efficiency foam pump yields 0.8ml, 1.2ml, or 1.6ml per cycle, while the micro-spray pump dispenses 0.4ml, 0.6ml, or 0.8ml of liquid sanitizer. Power is supplied by 4 AA alkaline batteries housed in a side-access compartment, supported by an ultra-low-power standby circuit that extends battery life up to 12 full months or roughly 50,000 cycles. Maintenance teams can easily hot-swap the modular pump heads in the field, allowing the facility to shift from foam soap to liquid sanitizers without replacing the entire dispenser backplate.

Installation Options

The dispenser features a highly compact, ADA-compliant chassis measuring 255mm in height, 133mm in width, and 91.5mm in depth, ensuring it projects less than 4 inches from the wall for safe corridor installation. Installers can easily mount the self-contained backplate to drywall, concrete, tile, or wood surfaces using the integrated keyhole slots and included stainless steel anchor screws. For historical facilities or leased properties where drilling is strictly prohibited, the flat backplate is fully compatible with heavy-duty industrial double-sided adhesive mounting tape. The standardized backplate layout is designed for rapid retrofit projects, allowing a single technician to align, mount, and commission each unit in less than ten minutes.

1. Use the provided security key to unlock the top latch and swing the front ABS housing cover downward to open.
2. Position the backplate against the wall at least 30cm above the sink counter or vanity surface to prevent sensor interference.
3. Mark the four mounting hole positions through the backplate keyhole slots onto the wall surface.
4. Drill holes at the marked locations, insert the included plastic wall anchors, and secure the backplate with the provided stainless steel screws.
5. Slide the side-access battery compartment open and insert 4 AA alkaline batteries, verifying correct polarity alignment.
6. Slide either the 1000ml refillable tank or the 1000ml disposable HDPE cartridge along the internal guide rails until it locks securely into the pump drive.
7. Press the internal orange adjustment button to cycle through and select your target dosage (Level 1, Level 2, or Level 3).
8. Close the front cover firmly until the lock clicks, sweep a hand under the sensor to test, and verify the red status indicator light flashes.

Applications

The Soap Dispenser / WE-2213B 1000ml Automatic Soap Dispenser is the ideal choice for high-traffic environments, including corporate offices, school washrooms, public airports, and shopping mall restrooms. In healthcare facilities and hospital clinics, utilizing the sealed 1000ml disposable HDPE cartridge minimizes cross-contamination risks and satisfies stringent infection control standards. For hotel guest bathrooms and premium spa facilities, the optional brushed 304 stainless steel faceplates or customizable decorative patterns integrate elegantly with modern architectural hardware. Restaurant kitchens benefit from the rapid touchless hand wash cycle, ensuring staff maintain sanitary prep areas without transferring grease or bacteria to manual pump dispensers. Facility planners managing multi-site portfolios rely on the adjustable dosage settings to standardize liquid inventory and precisely control operating costs.

Technical Specifications

The Soap Dispenser / WE-2213B 1000ml Automatic Soap Dispenser specification profile details a main unit measuring 255mm (H) x 133mm (W) x 91.5mm (D) and weighing TBD kg. The modular interior accepts a 1000ml disposable HDPE cartridge measuring 135mm (H) x 121.5mm (W) x 85mm (D). Power supply requirements are strictly 4 AA alkaline batteries. Foam pump settings are adjustable to 0.8ml (Level 1), 1.2ml (Level 2), and 1.6ml (Level 3); spray pump settings are adjustable to 0.4ml (Level 1), 0.6ml (Level 2), and 0.8ml (Level 3). Standard product packaging is 40 units per master carton with carton dimensions of 571mm x 506mm x 591mm, while disposable HDPE cartridges are packed 12 units per carton with dimensions of 392mm x 373mm x 164mm. Liquid formulas are compatible with custom scent profiles including Jasmine, Peppermint, and Saffron.

About the Manufacturer

Shenzhen Pingdi AOLQ Bathroom Supply Co., Ltd. is a premier, specialized manufacturer of professional commercial washroom systems founded in 2002. Operating from our state-of-the-art 13,000 square meter production facility in Shenzhen, China, we maintain a robust daily manufacturing capacity exceeding 10,000 units to guarantee rapid fulfillment for international projects. Our fully integrated facility manages all aspects of industrial design, mold manufacturing, precision injection molding, electronics assembly, and exhaustive quality testing. Certified under ISO 9001 quality management, our brand portfolio including AOLQ, SBF, and WE is manufactured in strict compliance with international standards, with CE, RoHS, FCC, and CCC certifications shown in our 2025 catalog. We specialize in robust OEM/ODM engineering partnerships, providing tailored finishes, branding, and mounting configurations for project buyers globally.

Contact Us

Contact our Shenzhen factory export division today to request custom volume pricing, OEM color matching, or to order a physical sample unit for facility testing.